TOSHIBA hfe toshiba sd-1700 1750 service en free download

File name hfe_toshiba_sd-1700_1750_service_en.pdf

FILE NO. 810-200102 SERVICE MANUAL DVD VIDEO PLAYER SD-1700 SD-1750 Jun., 2001 5 LASER BEAM CAUTION LABEL When the power supply is being turned on, you may not remove this laser cautions label. If it removes, radiation of a laser may be recceived. PREPARATION OF SERVICING Pickup Head consists of a laser diode that is very susceptible to external static electricity. Although it operates properly after replacement, if it was subject to electrostatic discharge during replacement, its life might be shortened. When replacing, use a conductive mat, soldering iron with ground wire, etc. to protect the laser diode from damage by static electricity. And also, the LSI and IC are same as above. Ground conductive wrist strap for body. Soldering iron with ground wire or ceramic type 1M 9 Conductive mat The ground resistance between the ground line and the ground is less than 10 9 . Note: : Only for SD-1750. DIGITAL VIDEO SD-1700 is not provided with playback function of VIDEO CD. SAFETY NOTICE SAFETY PRECAUTIONS LEAKAGE CURRENT CHECK Plug the AC line cord directly into a 120V AC outlet (do Measure the AC voltage across the 1500 resistor. not use an isolation transformer for this check). Use an The test must be conducted with the AC switch on and AC voltmeter, having 5000 per volt or more sensitivity. then repeated with the AC switch off. The AC voltage Connect a 1500 10 W resistor, paralleled by a 0.15